Atlanta, GA (December 2009) – AirSept’s Line Splice is now available in new 10mm and 12mm sizes to fit metric OD lines used on import vehicles.

Repair rub-through damage and pinhole leaks in a steel or aluminum line with the new Line Splice from AirSept. Repairing just the damaged section requires much less labor time. Now you can repair damaged lines without removing the entire line.

With AirSept’s new Line Splice technicians can repair the damaged section of the line, offer the customer a lower cost, and make as much if not more profit as selling a new line. The shop saves the line cost, avoids the labor time of complete line R&R, and gets the repair done quickly.

The Line Splice works on steel or aluminum lines, including a/c, transmission, heater and power steering lines.

A new sealing sleeve is up to 8 times wider than a standard o-ring, for more seal contact area on irregular tubing surfaces. It helps prevent leak “travel” that can defeat narrow o-ring seals.

The wider sleeve also helps resist the vibration that creates leaks. A slotted tension ring and tapered nut guarantee a tight grip on the line.

AirSept’s new Line Splice works with standard open end wrenches, so no costly crimping tools are required.

The small footprint (under 2.5”) fits in tight spaces under the hood.

For more information go to www.airsept.com.

Las Vegas, NV, Nov. 3, 2009 – Tenneco Inc.’s (NYSE: TEN) MonroeÆ shocks and struts brand has been a strong proponent of the 50,000-mile/80,000-kilometer replacement recommendation* since it was introduced in 2005. For the past five years, virtually all Monroe ride control marketing materials and consumer advertising campaigns have highlighted the replacement recommendation as well as Tenneco’s Safety Triangle vehicle maintenance message, which touts the importance of undercar safety inspections.

“Both the replacement recommendation and Safety Triangle message focus on the ultimate benefit of ride control service – increased driving safety,” said Monroe Brand Manager Carri Irby. “As consumers learn that shocks, struts and other key undercar components help keep them safe on the road, they are more likely to ask for a ride control inspection as part of their scheduled vehicle maintenance.”

For further details, visit www.monroe.com.

*Actual mileage may vary depending upon driver ability, vehicle type and type of driving and road conditions.

Return to Information Station

Applications include Chevrolet, Chrysler, Dodge, Ford, GMC, Honda, Hyundai, Kia, Lexus, Lincoln, Mazda, Mercury, Mitsubishi, Nissan, Saturn, Suzuki, and Toyota. The converters are designed to OE-Style specifications for fit, form, and function, and come complete with all installation hardware.

Bosal catalytic converters are quality built to strict specs and 49 state OBDII EPA compliant. They feature heavy gauge stainless steel construction with seam welded design, a ribbed body for structural stability and durability, smooth flowing inlet/outlet joints, and a monolithic honeycomb catalyst for maximum flow.

For more information, see www.bosalna.com.

Return to Information Station

Reduces need for scraping and grinding; eliminates potential flange damage.

Hartford, CT… Permatex, a leading innovator in chemical technology for automotive maintenance and repair, has introduced a new, advanced gasket remover that features a fast acting, low Voc foam formulation. New Permatex Gasket Remover (p/n 80645) quickly removes all solvent-based gasketing adhesives and sealants, even baked-on gaskets. Its powerful foaming action and built-in applicator tip brush can help remove the gasket from any flange surface in 15-20 minutes.

Permatex low Voc Gasket Remover is a safe alternative to harsh chlorinated solvents, and is Voc compliant in all 50 states.

For more information, see www.permatex.com.

Return to Information Station

We’re honored to introduce this commemorative edition of the American-made Henry Golden Boy as a tribute to all the young men who have earned scouting’s highest award.

The gleaming nickel-plated receiver is adorned with spectacular engraving hand cut by Henry engraver Rob Bunting. The right side is highlighted by the image of a majestic bald eagle accented by distinctive American scrollwork and a banner proclaiming the proud sentiment of all Eagle Scouts: Once an Eagle, Always an Eagle. The left side bears the image of the famous Eagle Scout™ medal and banners reading Eagle Scout and Boy Scouts of America.

http://henryrifles.com/

Return to Information Station

New DynoMax VT™ Muffler Features Patented Valve Technology, Straight-Through Welded Stainless Steel Construction

LOS ANGELES, Tues., Jan. 19, 2010 – DynoMax Performance Exhaust – a leading innovator in performance exhaust technologies – introduced the DynoMax VT™ muffler, a revolutionary, high-flow stainless steel performance muffler that controls irritating drone while ensuring maximum performance on a full-range of street applications.

The new DynoMax muffler’s proven performance advantage can be seen in recent flow-bench testing of the DynoMax VT (No. 17956), MagnaFlow (No. 11226), and Flowmaster (No. 42541) products. The DynoMax VT muffler delivered 841 cubic-feet-per-minute flow, compared to 588 CFM for the MagnaFlow and 373 CFM for the Flowmaster.1

For more details, visit www.DynoMax.com.

Return to Information Station

AMRA/MAP has updated the Uniform Inspection & Communication Standards (UICS) for the following automotive systems: Brakes, Drive-Train & Transmission, Electrical, Engine Performance & Maintenance w/ Exhaust, HVAC, and Steering & Suspension (including Tires & Wheels), in addition to the Routine Inspection Reference Guide.

For more information, see AMRA (www.amra.org) or MAP (www.motorist.org).

Return to Information Station

The company touts the product as biodegradable and points out that beef tallow is a renewable resource grown and processed in the U.S.


For more details, see www.getg.com/articles/index.php.

Return to Information Station

AAIA Introduces New DRIVE Online Aftermarket Training and Education Resource

BETHESDA, MD – Jan. 26, 2010 – With today’s unveiling of its new online directory for aftermarket training and education, the Automotive Aftermarket Industry Association (AAIA) urges all aftermarket companies and associations to submit their resources for inclusion. The Directory of Resources for Industry Valued Education (DRIVE), located at www.aftermarket.org/DRIVE, is a one-stop resource enabling the industry to easily locate available training and education information, materials and programs.

“Aftermarket companies have invested in developing training and education resources for customers and their employees,” said Kathleen Schmatz, AAIA president and CEO. “DRIVE is designed to make it easier to find the information and tools needed. And, since the directory is in Google format, DRIVE’s content will be updated when the participating organizations update their company Web sites.”
For more information, visit www.aftermarket.org.

Return to Information Station

The Company Enhances its Factory New Program with Coreless Compressors

LONG BEACH, Calif. – In an effort to meet customer requirements, DENSO substantially improved its First Time Fit® automotive air conditioning compressor program.

Beginning with the 2010 program, all First Time Fit® remanufactured compressors will be coreless.  The coreless conversion enhances the line’s cost-effectiveness by eliminating core charges and the costs associated with their collection, storage and return.  

The coreless conversion affects many of DENSO’s key designs, including SB/SBU, SE and scroll compressors. 

For more information, please contact your local DENSO sales representative or go to www.densocorp-na-dsca.com.

Return to Information Station